User Manual Q&AAnswer
Mar 05, 2025 - 02:52 AM
To charge the battery of the Einhell TE-SG 18/10 Li Cordless Sealing Gun, please follow these steps:
1. Remove the battery pack from the handle by pressing the pushlock button downwards.
2. Check that your mains voltage is the same as that marked on the rating plate of the battery charger.
3. Insert the power plug of the charger into a mains socket outlet. The green LED on the charger will begin to flash.
4. Push the battery pack onto the battery charger.
5. Refer to the charger indicator section in the instruction manual for an explanation of the LED indicator on the charger. The LED indicators will show the charge status of the battery.
6. If the battery pack fails to charge, check the voltage at the power socket and ensure there is good contact at the charging contacts of the charging unit.
7. If the battery pack still fails to charge, send the charger, charging adapter, and the battery pack to the customer service center for further assistance.
Please note that it is important to remove the battery pack before making any adjustments to the tool. Additionally, it is recommended to recharge the battery pack promptly when you notice a drop in the performance of the device and to never allow the battery pack to become fully discharged, as this may cause it to develop a defect.
Add New Comment