Answer

Mar 05, 2025 - 02:50 AM
To change the switch mode on the Level One GSW-1657 16 Port Gigabit Switch, follow these steps:
1. Locate the Mode Control button on the switch. It is usually located on the front or back panel.
2. Press and hold the Mode Control button for a few seconds until the LED indicators start flashing.
3. Release the Mode Control button.
4. The LED indicators will now indicate the current switch mode. The Power LED will be solid green.
- Normal mode: All ports can communicate with each other.
- Flow control mode: Flow control function is closed, allowing all ports to communicate with each other.
- VLAN mode: Ports 1 to 14 cannot communicate with each other, but can communicate with ports 15 to 16.
- Extend mode: Speed of ports 1 to 8 is reduced to 10 Mbps, and transmission distance can reach 250m.
5. To change the switch mode, press the Mode Control button repeatedly until the desired mode is indicated by the LED indicators.
6. Once the desired mode is selected, the LED indicators will stop flashing and the switch will operate in the chosen mode.
Please refer to the Level One GSW-1657 16 Port Gigabit Switch Installation Guide for more detailed instructions and illustrations.
Add New Comment