Answer

Mar 05, 2025 - 02:48 AM
To set up the COOLZY-GO PC9B Portable Air Conditioner, follow these steps:
1. After removing the air conditioner from the box, place it in an upright position.
2. Remove the cable from the drawer at the back of the unit and insert the plug into a wall outlet. Make sure to push the drawer fully back in so it is flush with the back panel.
3. Open the warm air deflector fully. This will turn on the unit and the compressor will start.
4. Open the cold air deflector and allow 2 minutes for the air coming out to feel cold.
5. Keep a door or window open to allow fresh air circulation, unless it is extremely hot or windy outside.
6. Avoid using a fan nearby as it can disrupt the air flow of the COOLZY-GO PC9B.
7. Position the air conditioner close enough for comfort, ideally within a range of 5 - 10 feet (1.5 - 3 meters). Adjust the angle of the cold air deflector so that cool air flows around your face and shoulders.
8. For sleeping, position the unit about 6 inches (15 cm) from the end of the bed and adjust the cold air deflector to direct the cool air over your face and upper body.
9. Optional accessories, such as an adjustable nozzle (Focus Enhancer) and Igloo tent, are available for purchase to enhance the cooling effect and provide insect protection.
Please refer to the user guide for more detailed instructions and safety precautions.
Add New Comment