How do I install the Philips 9290032620 LED Outdoor Low Voltage Pedestal? (Philips 9290032620 LED Low Voltage Pedestal User Manual)

Answer

manuals.plus

Mar 05, 2025 - 02:48 AM

To install the Philips 9290032620 LED Outdoor Low Voltage Pedestal, please follow the steps outlined in the user manual provided with the product. Here is a general guide for installation:

1. Check the contents of the box to ensure you have all the necessary components for installation.

2. Make sure you have the required tools for installation. The manual does not specify the tools required, so it is recommended to have basic tools like a screwdriver, pliers, and wire strippers on hand.

3. Determine the desired location for the pedestal and ensure it is suitable for outdoor use.

4. Connect the pedestal to the Philips Garden link Low-volt system (12V). The maximum wattage supported depends on the configuration:

- With a Dusk-to-Dawn Sensor: You can connect a maximum of 3 luminaires with a maximum power of 24W.
- With a 24W Power Supply Unit and Dusk-to-Dawn Sensor: You can connect a maximum of 3 luminaires within a range of 30 meters.
- With a 48W Power Supply Unit: You can connect a maximum of 6 luminaires within a range of 24 meters.

5. Ensure that the installation is done using low voltage only. The product is designed for low voltage use only.

6. Follow the specific instructions provided in the user manual for connecting the wires and securing the pedestal.

7. Once the installation is complete, test the pedestal to ensure it is functioning properly.

For more detailed instructions and illustrations, please refer to the user manual that came with the product. If you have any specific questions or encounter any difficulties during the installation process, it is recommended to consult the manual or contact Philips customer support for further assistance.