User Manual Q&AAnswer
Mar 05, 2025 - 02:47 AM
To install the Philips 9290032613 LED Outdoor Low Voltage Pedestal, please follow the steps below:
1. Ensure that the power supply unit is disconnected from the mains before starting the installation process.
2. Choose a suitable location for the pedestal, keeping in mind the desired lighting effect and the proximity to the power supply unit.
3. Dig a hole in the ground at the chosen location, ensuring that it is deep enough to accommodate the pedestal and provide stability.
4. Connect the power supply unit to the mains power source using the appropriate electrical connections. Refer to the user manual for detailed instructions on connecting the power supply unit.
5. Connect the Dusk-to-Dawn sensor to the power supply unit. The Dusk-to-Dawn sensor allows the luminaires to automatically turn on at dusk and off at dawn.
6. Connect the luminaires to the Dusk-to-Dawn sensor. The maximum number of luminaires that can be connected depends on the power supply unit and the Dusk-to-Dawn sensor being used. Refer to the user manual for specific details on the maximum number of luminaires allowed.
7. Place the pedestal into the hole in the ground, ensuring that it is securely positioned.
8. Connect the pedestal to the power supply unit and the Dusk-to-Dawn sensor using the provided cables. Make sure the connections are secure and properly insulated.
9. Cover the hole with soil or other suitable material, ensuring that the pedestal remains stable and upright.
10. Once the installation is complete, connect the power supply unit to the mains power source and test the lighting system to ensure it is functioning correctly.
Please note that this is a general overview of the installation process. For more detailed instructions and safety guidelines, please refer to the user manual provided with the product.
Add New Comment