User Manual Q&AAnswer
Mar 05, 2025 - 02:31 AM
To install the for Integrated Column Refrigerator or Freezer, please follow these steps:
1. Start by ensuring that the refrigerator or freezer is turned off and unplugged from the power source for safety.
2. Remove any existing handles or hardware from the front of the appliance.
3. Take the square handle kit and align it with the pre-drilled holes on the front of the refrigerator or freezer door.
4. Insert the provided screws through the holes in the handle and into the pre-drilled holes on the door.
5. Use a screwdriver or drill to tighten the screws securely, but be careful not to overtighten and damage the handle or door.
6. Repeat the process for the other side of the appliance if you have a pair of handles.
7. Once the handles are securely attached, you can plug the refrigerator or freezer back in and turn it on.
It is important to note that the FISHER PAYKEL AHV2-RD84 Professional Square Handle Kit is designed to be used with Fisher and Paykel stainless steel door panels or cabinetry panels made by your cabinet maker. Make sure you have the appropriate panels before attempting to install the handle kit.
For more detailed instructions and illustrations, please refer to the User Guide provided with the product or contact Fisher & Paykel's Customer Care Centre at 1.888.936.7872 for further assistance.
Add New Comment