User Manual Q&AAnswer
Mar 05, 2025 - 02:31 AM
To assemble and install the ET2 E20366 Half Moon Large LED Pendant, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before getting started, read the instructions carefully to familiarize yourself with the assembly process.
2. Open the package carefully with a sharp tool like a cutter knife, making sure not to damage the components inside.
3. Remove all packaging materials and retain them for future use.
4. Choose a clean, level, and spacious area for assembly. Avoid hard surfaces that may damage the product.
5. Ensure that you have all the required contents for complete assembly.
6. Take care when lifting the pendant. Assemble it in close proximity to where you intend to position it.
7. Do not over tighten the screws and bolts as it may damage the threads.
8. Consult an electrician before installation to ensure proper wiring and safety.
9. Once assembled, follow the general lighting instructions provided in the manual.
10. Disconnect the pendant from the power source before cleaning or maintenance.
11. Switch off, unplug, and allow the bulb to cool before replacing it or cleaning the pendant.
12. Only use the recommended bulb type and do not exceed the maximum wattage to prevent fire hazards.
13. Do not plug the pendant in if the cord is torn or frayed.
14. For cleaning and maintenance, use appropriate cleansers for respective shade surfaces such as glass cleaner, acrylic polish, or wood polish. Avoid abrasive cleaners.
15. Clean the pendant with a soft cloth and mild detergent.
16. Periodically (every 90 days), ensure that all screws are fully tightened.
17. Avoid prolonged exposure to heat sources, as it may cause glazing, melting, scorching, or color fading.
Please refer to the ET2 E20366 Half Moon Large LED Pendant Instruction Manual for more detailed instructions and safety information.
Add New Comment