User Manual Q&AAnswer
Mar 05, 2025 - 02:29 AM
To install the KOHLER Jute Vanity K-99543-R, please follow the installation guide provided with the product. Here are some general steps to guide you:
1. Start by preparing the wall where you plan to mount the vanity. Ensure it is level and free from any obstructions.
2. Locate the wall studs using a stud finder and mark their positions on the wall.
3. Measure and mark the desired height for the vanity on the wall.
4. Attach a ledger board horizontally to the wall at the marked height. This will provide temporary support for the vanity during installation.
5. Place the vanity on the ledger board and align it with the marked height. Make sure it is level and centered.
6. Mark the locations of the mounting holes on the back of the vanity onto the wall.
7. Remove the vanity from the ledger board and drill pilot holes at the marked locations on the wall.
8. Install appropriate wall anchors or use the recommended fasteners based on your wall material.
9. Lift the vanity back onto the wall and align the mounting holes with the pilot holes.
10. Secure the vanity to the wall using the provided screws or fasteners.
11. Check for levelness and make any necessary adjustments.
12. Once the vanity is securely attached to the wall, remove the ledger board.
13. Connect the plumbing fixtures according to the manufacturer's instructions.
14. Install any optional accessories, such as shelves, trays, drawer dividers, or medicine cabinets, if desired.
Please refer to the specific installation guide included with the product for detailed instructions and any additional steps or considerations.
Add New Comment