User Manual Q&AAnswer
Mar 05, 2025 - 02:25 AM
To charge the NightSearcher Explorer 1200 Rechargeable Handheld Torch, follow these steps:
1. Ensure the torch is switched off.
2. Connect the supplied Fast Charging USB Type C Cable to the charging port located on the torch.
3. Plug the other end of the USB cable into a compatible USB power source, such as a computer USB port or a USB wall adapter.
4. The charging indicator on the torch will illuminate to indicate that charging has started.
5. Allow the torch to charge until the indicator light turns green, which indicates that the battery is fully charged.
6. Once fully charged, disconnect the USB cable from the torch and the power source.
It is important to note that the charging time may vary depending on the power source used. It is recommended to use a high-quality USB power source for optimal charging performance.
For additional charging options, you may consider purchasing the optional Vehicle Charger (CHIC3.7) accessory, which allows you to charge the torch using your vehicle's power outlet.
Please refer to the NightSearcher Explorer 1200 Rechargeable Handheld Torch User Manual for more detailed instructions and safety precautions regarding charging and usage of the torch.
Add New Comment