User Manual Q&AAnswer
Mar 05, 2025 - 02:22 AM
To open the Kali Duo Board Wall Bed, follow these steps:
1. Clear any items taller than 7’’ from the desk surface.
2. Release the latches on either side of the beds with one hand, while holding the top of the bed panel with the other hand. Gently pull the beds down into their locked, horizontal positions.
3. Raise the upper padded barriers and bottom headboard, ensuring that all of the upper barriers lock in place.
4. Make sure both the upper and lower beds are open and locked in the horizontal position. Position the ladder at the metal slots on each bed frame. Tilt the ladder away from the structure, inserting the lower hooks into the slots on the lower bed frame. Straighten the ladder upright and insert the upper hooks into the slots on the upper bed frame. Pull the ladder straight down, ensuring that both the upper and lower mechanisms are locked securely.
To close the Kali Duo Board Wall Bed, follow these steps:
1. Remove bed pillows and tuck bedding in on all sides around and under the mattresses. Latch both mattress straps over the bedding.
2. Remove the ladder from the structure by pulling the two pins at the top of the ladder to unlock the mechanism, while simultaneously pulling the ladder hooks up and away from the slots.
3. Starting with the barriers on the long side of the bed, push the button to disengage the lock and fold the barriers down onto the mattress. Close the barriers at the head and foot of the bed using the same method.
4. Fold down the barriers and bottom headboard in order to close the bed frame into the structure.
5. Release the latches on either side of the beds with one hand, and lift the beds up into their upright position with the other hand.
Please refer to the Kali Duo Board Wall Bed Instruction Manual for more detailed instructions and illustrations.
Add New Comment