User Manual Q&AAnswer
Mar 05, 2025 - 01:58 AM
To install the Mount-It MI-6771 Full Motion Single Monitor Desk Mount using the clamp installation option, follow these steps:
1. Open the clamp to be wider than the width of the desk.
2. Slide the clamp into place in the desired location.
3. Tighten the clamp back down using a 6mm Hex Wrench until it is secure.
4. Slide the Cable Management Clip into place as shown.
Please note that this installation option requires a desk with a suitable width for the clamp to be securely attached. Make sure to follow the instructions carefully to ensure proper installation and stability of the desk mount.
For more detailed instructions and illustrations, please refer to the instruction manual provided with the product.
Add New Comment