How do I connect and wire the elsner KNX S2-B6-AP Actuator with 2 Multifunctional Outputs? (elsner KNX S2-B6-AP 2 Multifunctional Outputs Instruction Manual)

Answer

manuals.plus

Mar 05, 2025 - 01:56 AM

To connect and wire the elsner KNX S2-B6-AP Actuator with 2 Multifunctional Outputs, follow these steps:

1. Make sure to hire a qualified electrician for the installation and commissioning of the actuator, as it involves working with mains voltage.

2. Before starting the installation, switch off the voltage to the system.

3. Connect the mains voltage and SELV (Safety Extra Low Voltage) according to the regulations and standards for electrical installations.

4. The terminal labels for the connections are located on the device. Refer to the device structure diagram (Fig. 3) in the manual for a visual representation.

5. The actuator has 6 binary inputs (labeled 1-6) that can be used for direct operation or as bus switches. Connect the desired input devices accordingly.

6. The actuator has 2 multifunctional outputs (labeled A1-A2 and B1-B2) that can be connected to drives with Up/Down control (e.g., blinds, shutters) or switchable devices (e.g., lights, ventilation). Refer to the connection examples (Fig. 4) in the manual for different wiring configurations.

7. The KNX bus terminals (+/-) are used for connecting the actuator to the KNX bus system.

8. Once the wiring is complete, the actuator needs to be commissioned. The physical address is assigned and parameters are set using the KNX software above ETS 5. The programming button (PROG) is located inside the device (Fig. 3, pos. 2).

Please note that these instructions provide a general overview of the wiring process. For specific details and further guidance, refer to the elsner KNX S2-B6-AP Actuator with 2 Multifunctional Outputs Instruction Manual provided by Elsner Elektronik.