User Manual Q&AAnswer
Mar 05, 2025 - 01:53 AM
To pair the transmitter and receiver of the Artcoustic CPH-X10, follow these steps:
1. Make sure both the transmitter and receiver are powered on.
2. Press and hold the pairing button on both the transmitter and receiver simultaneously for 3 seconds.
3. During pairing, the status indicator lights on both the transmitter and receiver will flash.
4. After successful pairing, the status indicator lights will change from flashing to steady.
5. If the transmitter stays in pairing mode for 15 seconds without successful pairing, it will automatically exit the pairing mode.
6. Be sure to press the receiver's pairing button within 15 seconds to complete the pairing process.
7. If you need to use one transmitter with multiple receivers, each receiver must be re-paired separately with the transmitter.
Note: The transmitter and receiver are already paired and completed by the factory, so you may not need to re-pair them unless necessary.
For more detailed instructions and illustrations, please refer to the "Functions" section of the Artcoustic CPH-X10 Wireless Audio Analogue Device Owner's Manual.
Add New Comment