User Manual Q&AAnswer
Mar 05, 2025 - 01:43 AM
To install the driver for the ArduCam 2MP OG02B10 Pivariety Color Global Shutter Camera Module for Raspberry Pi, you can follow these steps:
1. Open a terminal on your Raspberry Pi.
2. Run the following command to download the driver installation script:
```
wget -O install_pivariety_pkgs.sh https://github.com/ArduCAM/Arducam-Pi...
```
3. Make the script executable by running the following command:
```
chmod +x install_pivariety_pkgs.sh
```
4. Run the script to install the kernel driver:
```
./install_pivariety_pkgs.sh -p kernel_driver
```
5. When prompted, press 'y' to reboot your Raspberry Pi.
Note: The kernel driver installation is only supported by the latest version 5.10. If you are using a different kernel version, please refer to the documentation page provided by ArduCam for instructions on how to build the kernel driver for your specific camera.
For more detailed information on the driver installation and hardware connection, you can visit the ArduCam documentation page: [link to documentation page].
Add New Comment