User Manual Q&AAnswer
Mar 05, 2025 - 01:34 AM
To connect and set up the Paul Neuhaus 4425 LED Table Lamp, please follow these steps:
1. Electrical connection: Make sure the lamp is unplugged from the power source before proceeding. Connect the lamp to a suitable power outlet with a voltage of 230V and frequency of 50Hz.
2. Teach remote control: The lamp comes with a remote control for convenient operation. To teach the remote control, point it towards the lamp and press any button. This will establish a connection between the remote control and the lamp.
3. Switch on the lamp: Once the remote control is paired, you can switch on the lamp by pressing the power button on the remote control. The lamp should illuminate and be ready for use.
4. QR Code: The lamp may have a QR code on it. This QR code can be scanned using a QR code scanner on your smartphone or tablet to access additional information or features related to the lamp.
5. ZigBee network integration: If you wish to integrate the lamp into a ZigBee network, you will need to reset the lamp to its factory settings. Please refer to the instruction manual for specific instructions on how to perform the reset.
If you have any further questions or need assistance, you can contact Paul Neuhaus GmbH directly using the provided contact information:
Paul Neuhaus GmbH
Olakenweg 36
59457 Werl
Germany
Telephone: +49 (0) 2922-9721-0
Fax: +49 (0) 2922-9721-9120
Email: info@neuhaus-group.de
Additionally, you can visit their website for more information: https://scm.paul-neuhaus.de/public/conformity/
Add New Comment