User Manual Q&AAnswer
Mar 05, 2025 - 01:23 AM
To switch on the yeedi k600 Robot Vacuum Cleaner using the remote control, follow these steps:
1. Ensure that the robot is properly connected to the Charging Dock and the Charging Dock is plugged in.
2. Take the remote control and make sure it has batteries installed.
3. Press the power button on the remote control to switch on the robot.
4. The robot will start up and the indicator light on the robot will glow blue, indicating that it is charging.
5. Once the robot is switched on, you can select the desired cleaning mode using the buttons on the remote control.
Please refer to the "Operating and Programming" section of the user manual for more detailed instructions on using the remote control and selecting different cleaning modes.
Add New Comment