User Manual Q&AAnswer
Mar 05, 2025 - 01:22 AM
To change the drill bit on the DEWALT D25133 SDS Plus Rotary Hammer, please follow these steps:
1. Turn off the tool and disconnect it from the power source.
2. Hold the tool with one hand on the main handle and the other hand on the side handle for stability.
3. Pull back the chuck sleeve located at the front of the tool.
4. Insert the new drill bit into the chuck, making sure it is aligned with the jaws of the chuck.
5. Release the chuck sleeve to secure the drill bit in place.
6. Give the drill bit a gentle tug to ensure it is securely held by the chuck.
7. Connect the tool to the power source and turn it on to test the new drill bit.
For more detailed instructions and safety guidelines, please refer to the DEWALT D25133 SDS Plus Rotary Hammer Instruction Manual.
Add New Comment