User Manual Q&AAnswer
Mar 05, 2025 - 01:20 AM
To select the drilling mode on the Milwaukee 2803-20 and 2804-20, rotate the torque selector collar until the drill symbol appears in line with the arrow. This mode is used for drilling holes in various materials.
To select the driving mode, rotate the torque selector collar until the desired clutch setting appears in line with the arrow. The adjustable clutch will slip at a preset torque to prevent driving the xxxx too deep into different materials and to prevent damage to the xxxx or tool.
For the Milwaukee 2804-20 Hammer Drill/Driver, in addition to the drilling and driving modes, there is also a hammer-drilling mode. To use the hammer-drilling mode, rotate the torque selector collar until the hammer symbol appears in line with the arrow. Apply pressure to the bit to engage the hammering mechanism. This mode is used for drilling into masonry materials.
Always refer to the instruction manual for detailed instructions and safety precautions when using the drill/driver and hammer drill/driver.
Add New Comment