Answer

Mar 05, 2025 - 01:17 AM
To install the battery pack into the PORTER-CABLE PCC607 20V Max Brushless Drill, Driver, follow these steps:
1. Ensure that the drill is turned off and the trigger switch is not pressed.
2. Locate the battery release button on the bottom of the drill, near the battery area.
3. Press and hold the battery release button.
4. Align the battery pack with the battery compartment on the drill, ensuring that the battery contacts align with the contacts in the compartment.
5. Slide the battery pack into the compartment until you hear a click, indicating that the battery pack is securely installed.
6. Release the battery release button.
Your battery pack is now installed and ready to use. Make sure to fully charge the battery pack before using the drill for the first time, as outlined in the instruction manual.
Add New Comment