Answer

Mar 05, 2025 - 01:16 AM
To change the direction of rotation on the DEWALT DCD991, DCD996 Brushless Cordless Drill, Driver, Hammerdrill, follow these steps:
1. Release the trigger switch to turn off the tool.
2. Locate the forward/reverse control button on the right side of the tool.
3. To select forward rotation, press the forward/reverse control button on the right side of the tool.
4. To select reverse rotation, press the forward/reverse control button on the left side of the tool.
5. The center position of the control button locks the tool in the OFF position.
6. Always ensure the trigger is released when changing the position of the control button.
Please refer to the instruction manual for more detailed information and safety guidelines.
Add New Comment