Answer

Mar 05, 2025 - 01:14 AM
To assemble the evolur Bedside Sleeper, follow these steps:
1. Hold the central supporting structure (A) and turn both legs outward.
2. Insert the side rail into the middle support frame (B) by lining up the buttons and holes until you hear a click.
3. Select the middle support frame (B) and gently push it into the side slots until you hear a click. Make sure the curved bar is facing downward.
4. Insert the fixing steel bar (G) into the side slots.
5. Fix the fabric lining (E) to the central supporting structure (A) by hooking the loops on the bottom of the lining.
6. Fix the top rail on both sides and zip up the front panel.
7. Lift the side panel fabric cover over the curved bar and loop the 5 loop fasteners.
8. Place the mattress pad into the bedside sleeper.
For more detailed instructions and illustrations, please refer to the evolur Bedside Sleeper User Manual.
Note: Always make sure to check for any missing or damaged parts before assembling the bedside sleeper. If any parts are missing or damaged, contact Evolur for replacement parts and instructions.
Add New Comment