User Manual Q&AAnswer
Mar 05, 2025 - 01:13 AM
To pair the DAP BP-10 Beltpack transmitter with the PSS-110 speaker, follow these steps:
1. Switch on the PSS-110 speaker.
2. Choose the desired channel/frequency on the PSS-110. Refer to the PSS-110 user manual for more information.
3. Open the battery compartment cover of the BP-10 Beltpack transmitter.
4. Press and hold down the UP button on the PSS-110 for 3 seconds. The channel number will start blinking on the PSS-110's display.
5. Place the BP-10 Beltpack transmitter's infra-red (IR) sensor close to the PSS-110's display to pair both devices. When the devices are paired, the PSS-110's display will show the RF range.
6. Close the battery compartment cover of the BP-10 Beltpack transmitter.
Ensure that both devices are powered on and within range of each other for successful pairing. Refer to the user manual for additional troubleshooting steps if the pairing process is not successful.
Add New Comment