User Manual Q&AAnswer
Mar 05, 2025 - 01:08 AM
To attach the side handle and depth stop to the BLACK+DECKER BEHD201 1/2 IN. (13MM) Hammer Drill, please follow these steps:
1. Turn the grip counterclockwise until you can slide the side handle onto the front of the tool.
2. Rotate the side handle into the desired position.
3. Insert the depth stop into the mounting hole.
4. Tighten the side handle by turning the grip clockwise.
5. Ensure that the side handle is secure and will not rotate about the tool.
Please refer to Figure B in the instruction manual for a visual representation of the attachment process.
Add New Comment