How do I properly use the Molex 0026034061 Connector Discrete Wire Housing? (molex 0026034061 Connector Discrete Wire Housing Instruction Guide)

Answer

manuals.plus

Mar 05, 2025 - 12:23 AM

To properly use the Molex 0026034061 Connector Discrete Wire Housing, please follow the instructions below:

1. Identify the components: The Molex 0026034061 Connector Discrete Wire Housing is a 6-circuit housing designed for wire-to-board power applications. It is made of nylon material and has a natural color resin. The housing is compatible with Trifurcon terminals and features a friction ramp.

2. Prepare the wires: Strip the insulation from the ends of the wires that you want to connect to the housing. Ensure that the stripped portion of the wire matches the length specified in the product specification.

3. Insert the wires into the housing: Insert each wire into the corresponding cavity of the housing. Make sure the wire is fully inserted and that the insulation reaches the wire stop inside the housing.

4. Crimp the terminals: Use compatible Trifurcon terminals (such as 45570, 6838, or 7258) to crimp onto the stripped ends of the wires. Follow the crimping instructions provided with the terminals to ensure a secure connection.

5. Verify the connections: Double-check that each wire is properly inserted and securely crimped to its corresponding terminal. Ensure that there are no loose or exposed wires.

6. Mating and locking: The housing is designed to mate with a 3.96mm pitch KK Crimp Terminal Housing. Align the housing with the mating part and insert it until it locks into place. The housing has a locking feature to ensure a secure connection.

Please note that this answer is based on the information provided in the product description and specifications. For more detailed instructions and illustrations, it is recommended to refer to the Product Specification PS-40-02-001 and any other relevant documents available on the Molex website (www.molex.com).