User Manual Q&AAnswer
Mar 04, 2025 - 11:49 PM
To set the date and time on the Intermatic ET2805C time switch, follow these steps:
1. Press the MODE button until the SET and DATE icons appear at the top of the display. The month will start flashing.
2. Use the + or - buttons to select the current month, and then press ENTER/NEXT. The day of the month will start flashing.
3. Use the + or - buttons to select the current day of the month, and then press ENTER/NEXT. The year will start flashing.
4. Use the + or - buttons to enter the current year, and then press ENTER/NEXT. The month will start flashing again.
5. Press the MODE button to move to the next mode selection.
To set the time:
1. Press the MODE button until the SET and TIME icons appear on the display. The time will show as 12:00 AM (if the clock has not been set).
2. Use the + or - buttons to select the current time. You can also set the seconds to 00 by pressing ENTER/NEXT.
3. Press the MODE button to save the time and move to the next mode selection.
Make sure to refer to the installation guide for any additional instructions or details specific to your model (ET2805C, ET2805CR, ET2805CP).
Add New Comment