User Manual Q&AAnswer
Mar 04, 2025 - 11:34 PM
To install the LeuchtenDirekt 998752 BOARD TR LED Wall Light Shelf, please follow the steps outlined below:
1. Gather all the necessary tools and materials: You will need a screwdriver, a drill, screws, and wall anchors (if required).
2. Choose the desired location: Select a suitable spot on the wall where you want to install the LED wall light shelf. Ensure that it is close to a power source.
3. Mark the mounting holes: Hold the shelf against the wall in the desired position. Use a pencil or a marker to mark the locations of the mounting holes on the wall.
4. Pre-drill the holes (if necessary): If the wall surface is hard or if you are using wall anchors, pre-drill the marked holes using a drill bit that matches the size of the wall anchors.
5. Attach the shelf to the wall: Align the mounting holes on the shelf with the pre-drilled holes on the wall. Insert the screws through the holes and tighten them using a screwdriver. If using wall anchors, insert them into the pre-drilled holes before attaching the shelf.
6. Connect the power supply: The LeuchtenDirekt 998752 BOARD TR LED Wall Light Shelf operates on 230V/50Hz~ power supply. Ensure that the power is switched off before making any electrical connections. Connect the LED-Board to the power supply according to the manufacturer's instructions.
7. Test the light: Once the installation is complete, switch on the power and test the light to ensure it is functioning properly.
For any further assistance or clarification, you can contact LeuchtenDirekt GmbH's customer service at +49(0)2922 9721 9290 or via email at Kundenservice@neuhaus-group.de. You can also visit their website at www.leuchtendirekt.de for additional information.
Add New Comment