User Manual Q&AAnswer
Mar 04, 2025 - 11:33 PM
To set up the TELTONIKA FMM920 Small and Smart Tracker, follow these steps:
1. Remove the cover: Gently remove the FMM920 cover using a plastic pry tool from both sides.
2. Insert the Micro-SIM card: Insert a Micro-SIM card with the PIN request disabled. Make sure the Micro-SIM card's cut-off corner is pointing forward to the slot.
3. Remove the adhesive tape protection.
4. Place the battery: Place the battery inside the casing of the FMM920, making sure the adhesive tape sticks to the casing.
5. Connect the battery: Connect the internal battery to the FMM920 PCB.
6. Attach the cover back: Attach the device cover back. The device is now ready to be connected.
For further configuration and setup, you can connect the device to a computer using a Micro-USB cable or Bluetooth connection. The user manual provides detailed instructions on how to install USB drivers and use the Teltonika Configurator software for configuration.
Please refer to the TELTONIKA FMM920 Small and Smart Tracker User Manual for more information and detailed instructions on setting up the device.
Add New Comment