User Manual Q&AAnswer
Mar 04, 2025 - 11:32 PM
To install the Paul Neuhaus 998276 LED Pendant Lamp, please follow the steps below:
1. Ensure that the power supply is turned off before starting the installation process.
2. Identify a suitable location for the pendant lamp, taking into consideration the desired lighting effect and the availability of a power source.
3. Connect the lamp to the power supply by following these steps:
a. Remove the lampshade by gently unscrewing it counterclockwise.
b. Locate the E27 socket inside the lamp and insert the recommended E27/60W light bulb.
c. xxxx the lampshade back onto the lamp in a clockwise direction, ensuring it is securely fastened.
4. Mount the pendant lamp to the ceiling by following these steps:
a. Use a suitable tool to create a hole in the ceiling at the desired installation point.
b. Insert the provided mounting bracket into the hole and secure it in place using screws or other appropriate fasteners.
c. Connect the wires from the pendant lamp to the corresponding wires in the ceiling, ensuring proper electrical connections.
d. Carefully tuck the wires into the ceiling cavity and secure them in place using cable clips or other suitable methods.
e. Attach the pendant lamp to the mounting bracket, ensuring it is securely fixed.
5. Once the installation is complete, turn on the power supply and test the functionality of the pendant lamp.
Please note that the above instructions are a general guideline. It is always recommended to refer to the specific instructions provided in the Paul Neuhaus 998276 LED Pendant Lamp instruction manual for detailed and accurate installation steps.
Add New Comment