User Manual Q&AAnswer
Mar 04, 2025 - 11:30 PM
Installation of the Paul Neuhaus 998275 Lami Pendant Light involves a few simple steps. Please follow the instructions below:
1. Before starting the installation, ensure that the power is switched off at the main circuit breaker to avoid any electrical hazards.
2. Identify a suitable location for the pendant light. Ensure that the ceiling is strong enough to support the weight of the light fixture.
3. Remove the packaging and carefully unpack the pendant light, ensuring that all the components are included.
4. Attach the mounting bracket to the ceiling using the provided screws and anchors. Make sure the bracket is securely fastened.
5. Connect the electrical wires from the ceiling to the wires of the pendant light. Match the corresponding colors (e.g., black to black, white to white, and green or copper to the grounding wire).
6. Use wire connectors or twist the wires together and secure them with electrical tape. Ensure that the connections are tight and insulated.
7. Gently tuck the wires into the electrical box and attach the pendant light to the mounting bracket using the provided screws.
8. Once the pendant light is securely attached, insert the recommended light bulbs (3x E14/25W) into the sockets.
9. Finally, switch on the power at the main circuit breaker and test the pendant light to ensure it is functioning properly.
For any further assistance or clarification, you can contact LeuchtenDirekt GmbH, the manufacturer of the Paul Neuhaus 998275 Lami Pendant Light, through their customer service channels:
LeuchtenDirekt GmbH
Olakenweg 36
D-59457 Werl
Phone: +49(0)2922 9721 9290
Email: Kundenservice@neuhaus-group.de
Website: www.leuchtendirekt.de
Please refer to the provided manual for additional information and safety precautions during installation.
Add New Comment