User Manual Q&AAnswer
Mar 04, 2025 - 11:22 PM
To connect the Vocaster HP60v headphones to your audio device, you will need to use the included 6.35mm jack adaptor. Most audio interfaces and the Vocaster itself use this size connector. If you are connecting to smaller devices like a laptop or phone, you need to remove the 6.35mm jack adaptor by unscrewing it from the headphone cable. To connect the headphones to your Vocaster or audio interface, xxxx on the 6.35mm jack adaptor clockwise. Make sure it is securely attached for proper audio transmission.
For smaller devices, unscrew the adaptor counterclockwise to use your headphones without it. This will expose the 3.5mm stereo jack, which is the standard size for headphone connections on laptops, phones, and other portable devices.
Please refer to the user guide for visual instructions and additional information on connecting the Vocaster HP60v headphones to different devices.
Add New Comment