User Manual Q&AAnswer
Mar 04, 2025 - 11:19 PM
To connect your Powersoft T302 T Series 2-Channel Amplifier to your speakers, follow these steps:
1. Locate the output connections on the rear panel of the amplifier. For the T302 model, there are two Speakon NL-4 connectors labeled "Channel 1+2" and "Channel 2+n.c."
2. Identify the positive and negative terminals on your speakers. The positive terminal is usually marked with a "+" symbol, and the negative terminal is marked with a "-" symbol.
3. Connect the positive terminal of your speaker to the corresponding positive terminal on the amplifier using a Speakon NL-4 cable. For example, if you are connecting a speaker to Channel 1, connect the positive terminal of the speaker to the "Channel 1+2" Speakon NL-4 connector.
4. Connect the negative terminal of your speaker to the corresponding negative terminal on the amplifier using the same Speakon NL-4 cable. For example, connect the negative terminal of the speaker to the "-" terminal on the "Channel 1+2" Speakon NL-4 connector.
5. Repeat steps 3 and 4 for any additional speakers you want to connect to the amplifier.
6. Ensure that all connections are secure and properly tightened.
7. Power on the amplifier and your speakers.
Note: It is important to follow the safety instructions and guidelines provided in the user guide to ensure proper and safe usage of the amplifier.
Add New Comment