How do I install the ETNA KIF780ZT Induction Hobs? (ETNA KIF780ZT Induction Hobs Instruction Manual)

Answer

manuals.plus

Mar 04, 2025 - 11:11 PM

To install the ETNA KIF780ZT Induction Hobs, it is important to follow the safety regulations and have a registered and qualified installer carry out the fitting. Here are the steps for installation:

1. Preparations for installation:
- Ensure there is enough free space around the appliance. The minimum requirements are:
- A minimum of 650mm of space (A) above the hob.
- A minimum of 450mm of space (C) on each side of the hob.
- A minimum of 40mm of space (D) between the hob and the rear wall.
- Make sure the appliance is properly earthed.
- The electrical connection must comply with national and local regulations.

2. Electrical connection:
- Refer to the electrical connection specifications provided in the manual for your specific model.
- The connected load for the KIF780ZT, KIF780DS, and KIF790ZT models is 7200W.
- Make the required connections on the connecting block according to the wiring diagrams provided on the back of the appliance.
- The electrical connection options include:
- 2N 380-415V 50/60Hz - 2x 16A
- 2 phases - 1 neutral
- 2-2N 220-240V 50Hz - 2x 16A
- 2 phases - 2 neutrals
- 1 1N 220-240V 50/60Hz - 1x 32A
- 1 phase - 1 neutral
- 3N 380-415V 50/60Hz - 3x 16A

3. Accessibility:
- Ensure that the hob is easily accessible for installation and future maintenance.

Please note that the information provided here is a general overview of the installation process. It is always recommended to refer to the complete instruction manual for detailed instructions specific to your model. You can find the most recent version of the installation instructions on the ETNA website.