How do I install the Focal 200 ICW6 In-Wall Speaker? (Focal 200 ICW6 In-Wall Speaker User Manual)

Answer

manuals.plus

Mar 04, 2025 - 10:56 PM

To install the Focal 200 ICW6 In-Wall Speaker, please follow these step-by-step instructions:

1. Before installing the speaker, make sure the intended positions on the wall/ceiling are not obstructed by air vents or cables that may interfere with the installation.

2. If you are working with existing construction, ensure that the wall/ceiling is thick enough to allow the speaker to be installed.

3. Wire the speaker by using the cable connector supplied. Make sure to leave enough cable length (approximately 19 3/4"/50cm) to connect the product with ease. Use a cable with a marker to ensure the polarity of the speaker drivers is respected (+/-).

4. The speaker is fitted to the wall/ceiling using rotating brackets. Place the speaker into the cut-out opening and turn the xxxx on the mounting brackets clockwise to tighten it using a Phillips screwdriver or a xxxx -gun. If using a screwdriver, set the tightening torque to a low value to avoid damaging the mounting brackets. The speaker is adequately attached when you feel resistance at the end of tightening.

5. If you are working with new construction, use a suitable tool to cut a circular opening in the wall/ceiling.

6. Prepare the cables and wire the speaker using the cable connector supplied. Leave enough cable length (approximately 19 3/4"/50cm) to connect the product with ease. Use a cable with a marker to ensure the polarity of the speaker drivers is respected (+/-).

7. Follow the same process as step 4 to attach the speaker to the wall/ceiling using the rotating brackets.

Please note that the installation operations should be performed by a qualified professional who is familiar with installation and safety standards. Focal does not provide any end-of-use warranty for a given bracket or installation, as installing the loudspeakers is the customer's sole responsibility. It is recommended to consult with a professional installer to ensure proper installation and to avoid any incidents or damage.

For more detailed information and illustrations, please refer to the Focal 200 ICW6 In-Wall Speaker User Manual.