User Manual Q&AAnswer
Mar 04, 2025 - 10:55 PM
Installation of the Paul Neuhaus 15276 Board LED Wall Light Shelf is relatively straightforward. Please follow the steps below:
1. Start by ensuring that the power supply is turned off before beginning the installation process.
2. Locate a suitable location on the wall where you want to mount the light shelf. Ensure that the surface is clean and free from any obstructions.
3. Using a pencil, mark the desired position of the light shelf on the wall, taking into consideration the height and alignment.
4. Drill holes into the wall at the marked positions, using appropriate tools and taking care to avoid any electrical wiring or pipes behind the wall.
5. Insert wall plugs into the drilled holes, ensuring a secure fit.
6. Attach the mounting bracket provided with the light shelf to the wall using screws. Make sure the bracket is level and firmly fixed.
7. Connect the wiring of the light shelf to the electrical supply. If you are unsure about electrical connections, it is recommended to consult a qualified electrician.
8. Carefully align the light shelf with the mounting bracket and secure it in place using the screws provided.
9. Once the light shelf is securely mounted, turn on the power supply and test the functionality of the light.
Please note that these instructions are a general guide and it is always recommended to refer to the specific instruction manual provided with the product for detailed and accurate installation steps.
Add New Comment