User Manual Q&AAnswer
Mar 04, 2025 - 10:36 PM
To assemble the emerio 22048 Wet and Dry Vacuum Cleaner, follow these steps:
1. Before use, put the tank upside down and align the caster supports at their positions using the provided screws to tighten them.
2. The appliance has both suction and blower functions. To use the suction function, fit the hose into the suction port (position ①) by aligning the bulge and groove and turning it clockwise. To use the blower function, fit the hose into the blower port (position ②) by aligning the bulge and groove and turning it clockwise.
3. Attach the extension tube(s) to the curved hose.
4. Fit the floor brush or combi nozzle to the other end of the extension tube.
5. For wet pick-up, open the top cover and take out the cloth filter.
6. Check and make sure the drain port has its cover in place properly.
7. Unwind the power cord and insert the power plug into an appropriate power outlet.
8. Press the on/off button to the position "—" to turn on the appliance.
9. To reduce the suction power, move the suction power switch upwards: the larger the opening, the weaker the suction power.
10. After use, turn off the appliance by pressing the on/off button to the position "O".
Note: Other electrical tools can be plugged into the electrical outlet (Max. load: 1000W) on the top cover, and when the vacuum cleaner has been connected to the power outlet, this electrical tool can work with the electricity too.
Please refer to the emerio 22048 Wet and Dry Vacuum Cleaner User Manual for more detailed instructions and safety precautions.
Add New Comment