User Manual Q&AAnswer
Mar 04, 2025 - 10:25 PM
Here is a step-by-step guide for installing the Intermatic ET2715C, ET2715CR, ET2715CP Electronic 1 Circuit 7 Day Time Switch:
1. Disconnect power: Before installing or servicing the time switch, make sure to disconnect power at the circuit breaker(s) or disconnect switch(es).
2. Bonding: For plastic enclosures, bonding between conduit connections is not automatic and must be provided as part of the installation.
3. Wiring: Use #14-#8 AWG wires, rated at least 105°C - COPPER conductors ONLY. Make sure there is no wire insulation under the terminal plate on the time switch connector. Firmly tighten terminal screws.
4. Outdoor or wet locations: For outdoor locations or wet locations (rain-tight), use conduit hubs that comply with requirements of the UL514B (standard for fitting conduit and outlet boxes).
5. Insulator: Do not remove the insulator that is covering the terminals.
6. Maximum current carrying capacity: Do NOT exceed the maximum current carrying capacity.
7. Close the enclosure door: Keep the door closed at all times when not servicing.
For more detailed instructions and diagrams, please refer to the installation guide provided by Intermatic for the ET2715C, ET2715CR, ET2715CP Electronic 1 Circuit 7 Day Time Switch.
Add New Comment