User Manual Q&AAnswer
Mar 04, 2025 - 10:23 PM
To adjust the sensitivity of the SUNCO LIGHTING Occupancy Sensor Low High Bay, you need to flip switches 1, 2, and 3 on the sensor. The ON position, indicated as " ", increases the detection sensitivity, while the OFF position, indicated as " ", decreases the sensitivity. The corresponding table in the installation instructions provides guidance on the detection range based on the position of these switches.
It is important to note that the detection range refers to the circular radius of the detection zone on the ground when the sensor is mounted at a height of up to 40ft. Adjusting the sensitivity allows you to customize the sensor's response to motion within this range.
For more detailed instructions and illustrations, please refer to the installation instructions provided with the product.
Add New Comment