Answer

Mar 04, 2025 - 10:09 PM
To install additional fans in the Sharkoon RGB Wave ATX Case, follow these steps:
1. Determine the desired location for the additional fans. The top panel of the case provides an optional location for two additional fans with a diameter of either 120 mm or 140 mm.
2. If you have chosen to install fans on the top panel, remove the top panel by unscrewing the screws holding it in place.
3. Align the xxxx holes of the additional fans with the corresponding mounting holes on the top panel.
4. Secure the fans in place using screws, ensuring they are tightly fastened.
5. If you have removed the top panel, reattach it by aligning it with the case and tightening the screws.
6. Connect the fan cables to the appropriate fan headers on your motherboard or fan controller.
7. Power on your system and ensure that the additional fans are spinning and functioning properly.
Please refer to the Sharkoon RGB Wave ATX Case manual for more detailed instructions and illustrations on fan installation.
Add New Comment