How do I install the NightSearcher NSFASTSTAR10PIR Faststar PIR Range LED Floodlight? (NightSearcher NSFASTSTAR10PIR PIR Range LED Floodlight User Manual)

Answer

manuals.plus

Mar 04, 2025 - 10:01 PM


To install the NightSearcher NSFASTSTAR10PIR Faststar PIR Range LED Floodlight, please follow these steps:

1. Switch off the mains' power at the consumer unit before starting the installation.
2. Ensure that the installation complies with the latest IEE Wiring Regulations and use a qualified electrician for the installation.
3. Use an IP65-rated junction box for making the power connection.
4. Position the floodlight in an outdoor area away from flammable materials and ensure there is adequate air circulation.
5. Before drilling any fixing holes, check for hidden obstructions behind the mounting surface.
6. Use the floodlight bracket to mark the position of the fixing holes.
7. Drill the fixing holes and securely fix the floodlight into position using the provided screws and wall plugs.
8. Connect the main lead from the floodlight to the IP65-rated junction box, ensuring correct polarities for Live, Earth, and Neutral.
9. After wiring, check that all connections are correct, there are no bare wires, and the wire restraint is tight.
10. Switch on the electricity to check if the floodlight illuminates.
11. Adjust the angle of the floodlight to illuminate the desired area and tighten the floodlight brackets.

Please note that these instructions are a summary, and it is important to refer to the NightSearcher NSFASTSTAR10PIR Faststar PIR Range LED Floodlight User Manual for detailed installation instructions and safety precautions.