Answer

Mar 04, 2025 - 09:32 PM
To change the tool on the BOSCH 18V-EC GSR, GSB Professional Cordless Drill Driver, follow these steps:
1. Remove the battery from the power tool before carrying out any work on the tool.
2. Open the keyless chuck by turning it in the direction of rotation until the tool can be inserted.
3. Insert the tool into the chuck and firmly tighten the chuck by turning it by hand in the direction of rotation.
4. The tool is now securely attached to the drill driver and ready to be used.
Please refer to the "Changing the tool" section in the instruction manual for more detailed instructions and illustrations.
Add New Comment