User Manual Q&AAnswer
Mar 04, 2025 - 08:40 PM
To install the PuriSystems PuriCare 1100 3-Speed Remote Air Filtration System, you have two installation modes to choose from:
Installation Mode 1:
1. Fix the hook provided to the four holes at the top of the machine using the M4 nut. Make sure to tighten the nut to prevent the hook from rotating or falling off.
2. Fasten the horn hook to the ceiling.
3. Two people are required for this installation. One person should hold the dust collector while the other person connects the end of the chain to the machine hook.
4. Adjust the number of sections of the chain hook to balance the machine if needed.
Installation Mode 2:
1. Remove the four M4 screws from the top of the machine.
2. Install the pendant as shown in the picture and fix the M4 screws back in place.
3. One person should hold the dust collector while the other person screws the machine to the wall.
Please refer to the user manual for detailed illustrations and instructions on the installation process.
Note: It is important to follow the installation instructions provided in the manual to ensure proper installation and avoid any damage to the machine or surrounding areas.
Add New Comment