Answer

Mar 04, 2025 - 08:39 PM
To connect the MaxiSys MS906 Pro tablet with the MaxiVCI V200 device, you have two options: Bluetooth or USB cable.
1. Bluetooth Connection:
- Ensure that both the tablet and the MaxiVCI V200 are powered on.
- On the tablet, go to the "Settings" menu and select "Bluetooth".
- Enable Bluetooth on the tablet if it is not already enabled.
- The tablet and the MaxiVCI V200 are configured to automatically synchronize with each other on first use, so there should be no need to pair up. However, if they are not automatically connected, you can manually pair them by selecting the MaxiVCI V200 device from the list of available devices on the tablet.
- Once the tablet and the MaxiVCI V200 are successfully connected via Bluetooth, the VCI status button on the bottom bar of the tablet's screen will display a solid blue badge, indicating that the tablet is ready to start vehicle diagnosis.
2. USB Cable Connection:
- Ensure that both the tablet and the MaxiVCI V200 are powered on.
- Connect one end of the USB cable to the USB port on the MaxiVCI V200 device.
- Connect the other end of the USB cable to the USB port on the tablet.
- When the MaxiVCI V200 is properly connected to the vehicle and the tablet, the VCI status button on the bottom bar of the tablet's screen will display a green badge with a check mark at the corner, indicating that the tablet is ready to start vehicle diagnosis.
Note: It is important to ensure that the tablet is sufficiently charged or connected to the supplied DC power supply before starting the diagnostic process.
Add New Comment