Answer

Mar 04, 2025 - 08:38 PM
To mount the ProMaster US1014B 2-Light Transport Kit on a light stand, follow these steps:
1. Attach the Light Stand Mount: At the bottom center of the light, you will notice two ¼”-20 Threaded Ports. Slide the Light Stand Mount onto the lower part of the light and secure it using the Light Stand Mount Attachment xxxx .
2. Slide onto the Light Stand: With the Light Stand Mount installed, slide it onto the top of a sturdy light stand that has a 5/8” mounting stud. Make sure the Light Stand Connection xxxx is loosened and the cavity in the base of the Light Stand Mount is clear before placing it onto the stand.
3. Tighten the Connection xxxx : Once the light is mounted on the stand, tighten the Light Stand Connection xxxx to secure it in place.
4. Adjust the Tilt: Use the Tilt Control xxxx to change the light's angle. Loosen the xxxx , tilt the light to the desired position, and then re-tighten the xxxx .
By following these steps, you will be able to securely mount the ProMaster US1014B 2-Light Transport Kit on a light stand for your lighting needs.
Add New Comment