User Manual Q&AAnswer
Mar 04, 2025 - 08:30 PM
To insert the batteries in the Riester Ri-Scope L1 Ophthalmoscope, follow these steps:
1. Unscrew the battery handle cover on the lower part of the handle in a counter clockwise direction.
2. Insert the required batteries (2 standard alkaline batteries type C Baby or a ri-accu® 2.5 V) into the battery handle with the plus side facing towards the handle top.
3. xxxx the battery handle cover firmly back onto the battery handle.
To remove the batteries from the Riester Ri-Scope L1 Ophthalmoscope, follow these steps:
1. Unscrew the battery handle cover on the lower part of the battery handle in a counter clockwise direction.
2. Remove the batteries from the battery handle by holding the opening of the battery handle slightly downwards and shaking it slightly if necessary.
3. xxxx the battery handle cover firmly back onto the battery handle.
It is important to note that the Riester Ri-Scope L1 Ophthalmoscope is compatible with different types of battery handles, so make sure to use the appropriate batteries and follow the instructions specific to your battery handle type.
Add New Comment