User Manual Q&AAnswer
Mar 04, 2025 - 08:26 PM
To connect devices to the hama P2223761 Power Strip, please follow these steps:
1. Make sure the power strip is disconnected from the power supply.
2. Switch off all devices that you want to connect to the power strip.
3. Connect the power strip to an approved socket that is connected to the public power supply. The socket should be installed close to the power strip and easily accessible.
4. Connect your devices to the power strip by plugging them into the available outlets.
5. Ensure that the total power consumption of all connected devices does not exceed the power strip's maximum throughput rating.
6. Once all devices are connected, switch on the power strip using the On/Off switch, if available. If there is no switch, you can plug the power cord into the socket to turn on the power strip.
7. The indicator light for the overvoltage protector should light up when the power strip is in the operational state. If the indicator light does not light up, the overvoltage protector may be defective and should not be used. It should be replaced with a new overvoltage protector.
Please refer to the hama P2223761 Power Strip instruction manual for more detailed information and safety precautions.
Add New Comment