User Manual Q&AAnswer
Mar 04, 2025 - 08:25 PM
To connect devices to the USB ports on the Hama 00 223190 Power Strip, please follow these steps:
1. Before connecting a device, check whether it can be adequately supplied with the charger's current delivery.
2. Ensure that the total output of all the connected devices does not exceed 12 W.
3. Refer to the instructions in your device's operating manual for any specific requirements.
4. Connect your device to a USB charging port on the power strip using a suitable USB cable.
5. Connect the power strip to a properly installed and easily accessible mains socket.
6. The charging process will be displayed on your device.
7. If you wish to interrupt the charging process or when the device is fully charged, disconnect the device from the power strip.
8. Finally, disconnect the power strip from the mains power.
Please note that it is important to follow the safety instructions provided in the manual and ensure that the power strip is not overloaded with devices exceeding the maximum throughput rating.
Add New Comment