Answer

Mar 04, 2025 - 08:20 PM
To connect the AIYIMA A8 amplifier, follow these steps:
1. Connect the audio source (CD player, DAC decoder, mobile phone, TV, etc.) to the corresponding RCA input interfaces. Use the red RCA cable for the right channel and the white RCA cable for the left channel.
2. Connect the passive speakers to the speaker interface. Use the red terminal for the positive (+) connection and the black terminal for the negative (-) connection. Connect the right speaker to the R channel and the left speaker to the L channel.
3. Connect the power supply to the power interface. Make sure the DC voltage of the power supply is within the range of 15-26V.
4. Once everything is connected, turn on the power supply and start the amplifier by turning the on/off xxxx to the right. Adjust the xxxx to set the desired volume.
5. When you are done using the amplifier, turn the switch xxxx to the left to shut it down.
Note: Make sure to use a power supply with the correct voltage output and avoid placing the amplifier in high temperature and humidity environments.
If you encounter any issues, refer to the troubleshooting section in the user manual or contact Shenzhen Yima Technology Co.,Ltd for further assistance.
Add New Comment