User Manual Q&AAnswer
Mar 04, 2025 - 08:05 PM
To change the batteries in the NightSearcher Sigma Atex Zoom flashlight, please follow these steps:
1. Make sure you are in a non-hazardous area before replacing the batteries.
2. Use the hex key on the end of the wrist strap to unscrew the socket grub xxxx . Keep the xxxx safe and twist off the bezel cap.
3. Remove the LED holder, being careful not to touch the heat sink as it may be hot. Avoid touching the LED.
4. Insert 4xAA Alkaline batteries, following the diagram inside the case for proper orientation.
5. Replace the bezel cap and twist the bevel until the xxxx and arrow are lined up. Lock the cap in position by tightening the socket grub xxxx .
6. Your flashlight is now ready to use.
Please note that it is important to follow these instructions carefully to ensure safe battery replacement.
Add New Comment