User Manual Q&AAnswer
Mar 04, 2025 - 08:04 PM
To connect the Tecnoswitch EN 50663 Four Channels RGBW Strip LED Amplifier to your RGBW controller, follow these steps:
1. Ensure that the power supply is disconnected before making any connections.
2. Identify the xxxx terminals on the amplifier. These are used for connecting the wires.
3. Refer to the connection diagram provided in the instruction manual for the specific wiring configuration.
4. Connect the positive (+) and negative (-) wires from the RGBW controller to the corresponding xxxx terminals on the amplifier. Make sure to respect the polarity.
5. Repeat the above step for each of the four output channels (RGBW) on the amplifier.
6. Once all the connections are made correctly, you can power on the amplifier.
Please note that it is important to follow the connection diagram and respect the polarity to ensure proper functionality of the amplifier. Overvoltage or overloading the amplifier should be avoided.
For any further assistance or clarification, you can refer to the Tecnoswitch EN 50663 Four Channels RGBW Strip LED Amplifier Instruction Manual or contact Tecnoswitch directly via their provided contact information.
Add New Comment