User Manual Q&AAnswer
Mar 04, 2025 - 08:03 PM
To connect the TREATLIFE Smart Outdoor Plug to your home Wi-Fi network, please follow these steps:
1. Make sure the switch is connected to power and your phone is connected to your Wi-Fi router and has internet access. Note that the switch only supports 2.4GHz networks, so if you were previously connected to a 5GHz network, switch to the 2.4GHz network.
2. For Apple iOS devices:
- Press and hold the mechanical on/off button on the switch for 5 seconds until the red indicator light blinks.
- Open the TreatLife app and click on "Profile."
- Tap on "HomeKit Information" and then "Add Homekit Device" (make sure the red LED indicator is flashing).
- Scan the QR code provided.
3. For Android devices:
- Press and hold the mechanical on/off button on the switch for 5 seconds until the red indicator light blinks.
- Tap on "AP Mode" in the top right corner of the app.
- Tap on "Confirm indicator slowly blink."
- Enter your Wi-Fi password.
- Open WLAN settings on your phone and connect to the "TreatLife-XXX" network.
- Go back to the app and continue adding the device, then wait for the connection to complete.
For more detailed instructions and troubleshooting, please refer to the TREATLIFE Smart Outdoor Plug User Manual.
Add New Comment